Bowling Spare Techniques To Improve Your Game
While the average person would ask, “Just how difficult can it be to throw a bowlig ball down a straight alley and knock down ten pins?” a beginner bowler knows it can be much harder than you’d think! If a bowler fails to knock down all of the ten pins on the first attempt, then he has a “spare” to pick up. If the leftover pins are too far apart, the bowler has a dreaded “split.” Thankfully, the creators of the sport decided to be merciful… bowlers get not one, but two attempts to knock down all the ten pins.
The Advantages of Picking Up Spares…
There is a beneficial reason to pick up your spares. When you clear your spare or split, that score gets added to the next frame, greatly increasing your score. Imagine what your average would be if you routinely cleaned up your act! Learning how to pick up spares or splits will always vary in difficulty, but with practice, patience and perseverance, you too will be clearing frames like the pros!
The Tools to Knock ‘em ALL Down
If your spare is a cluster of pins or a single pin, you have an easy job. Simply aim your bowling ball straight at the remaining pins. Keep your arm swing smooth past your body and your wrist straight and vertical, like you’re going to shake someone’s hand.
However, if your offending pin is near to the gutter, on the same side as the hand you use to bowl, for instance, on your left if you are left-handed, there is an easy method to knock down the 7 or 10 pin, as the case may be. Move to the opposite side of the lane as your bowling hand and bowl across the lane at your pin. More advanced bowlers can use a hook to aim at a single-pin target when it’s on the opposite side of their bowling hand.
When two adjacent pins are left standing, your target is the forward pin. Simply clip it on the side opposite of the pin next to it, and your ball will knock them both down. Be careful of your technique if you try to knock the rear pin over…if the pin is hit too hard it will fly right past the other pin and leave it standing.
Hitting the Splits
The secret to picking up your splits depends on which pins are split.
The 2-7 or 3-10 Split: When you’re clearing the 2-7 or 3-10 split, hit the front pin on the side next to the other pin. Usually, the ball will go back and hit the rear pin as well.
The 4-5 or 5-6 Split: In these splits, the distance between the two pins and the bowler are about the same and in order to knock the pins both down, you must aim directly between them, hitting each pin at the same time by going straight through the middle.
The 7-10 and Other Far Splits: These splits are too far from each other to hit them both with the ball at the same time. A different technique, and also a bit of luck, is required. Hit one pin hard enough on the inside to cause it to ricochet off the side wall, back across the alley and into the remaining pin.
Knowing the secrets of bowling spares will result in much higher scores and an improved average. You can and will achieve all your bowling goals and impress your fellow bowlers. You will certainly look like the Pro by bowling clear frames!