Outlines For Environmental Training Courses
In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. They are considered ‘Green’ because they are environmentally friendly. It is easy to think that we may be travelling back in time when we think of items such as wind power and windmills. However, it is the result of eco-efficient and planet friendly options that this process is maintained.
It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors, that suits the home environment. It is equipment such as Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Biomass Energy is the next phase, and this involves Fuel, Pellets, Stoves and Boilers burning Wood. Of course, then there is the heating from the Sun – often just called Ground Source Heat Pumps. When we think about Wind Power and Hydropower we have two of the more common forms of energy generation.
Solar Energy Systems: Often called Solar Energy, this is fact based on two types of solar panels each using different ideas to get their results. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. Solar Panels themselves need to be away from all light blocks, and should be on south facing roofs at angles of 30 degrees from the horizontal plane.
For the UK, this is often considered the most popular form of ‘Green Energy’. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. Getting a professional fitting will cost around 2-5k, however, doing the job yourself could make it as low as 500 to 1500 pounds in total.
Biomass Energy Based Systems: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy, such as heat and electricity, that makes this so adaptable. The ability to generate electricity is one of the UK’s main green strengths – as it has one of the larger Biomass legacies within Europe. Added to all this, is the lack of C02 produced as a by-product of the whole process. Having a tree planted in place of another (that is felled for energy production) helps overall.
‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Perennial grasses also produce a high yield of dry matter. Within this process also sits the lesser known Agricultural and Municipal Wastes. Agricultural Waste is commonly formed as a by-product of traditional agricultural work. Another biomass source is that of municipal waste – and this comes from recycled wood or food.
Systems Using Geo-Thermal Energy – Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. By using the ground source temperature of approximately 12 degrees, we can either heat or cool buildings within the UK. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greater return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.
Wind Energy Programs: In use for milling grain or pumping water, wind energy has been with us for a very long time, although its modern uses are complex. However, in more recent times there’s been the option to recover the energy for its own sake – and deliver this either to a home unit or to the local power grid. The UK is considered as one of the best sources of wind generation within Europe. Potentially, we can produce 10 percent of our annual energy needs through wind power, although at present within the UK we still only use 1 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. Recovery of the cost involved is somewhere between 6-9 months.
Last of all there is Hydropower – an area of especial importance to the UK. Having said that, the art of using energy from moving water (just like wind power) is very traditional. Within the UK, this form of energy production is responsible for somewhere in the region of 2 percent of all electrical needs.
Using a turbine, a Hydropower system can transform the energy of water into other forms. No water reservoirs are required – as the turbines either run through a water drop-off system or the natural power of the river. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. Having said that, this process could still generate 200mW of the National Capacity. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.
Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. The UK is very well placed to provide most of the schemes set out above, and the UK domestic market again is one of the key beneficiaries of this technology.
Electrician and Plumbers are thought to be key in providing expertise during domestic installations. It is the political view of this type of energy generation that results in grants and financial aid becoming ever-more prevalent. Gaining installation certification across these areas can only provide further opportunity and job security to anyone already in related fields or looking to retrain. To cover both ends, you could consider electrical or plumbing training along with green systems.
(C) Scott Edwards 2009. Check out Renewable Energy Certification or CLICK HERE.