Simple Tips To Give Your Car Amp Extra Power
In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.
There are few tools required for doing this process. It includes pliers, 2 car audio amps, wire strippers, wrench, wire rated for the amplifiers. These tools will help in the accomplishment of task in a simpler way and easier way too.
Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.
Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .
There will be a bridge switch at the rear end of each amp usually. Turn on that switch in case if it is there. Take a wire . Remove the insulation to about half inch in both the ends of the wire taken.
Every amp has a positive terminal and a negative terminal . For easy identification red color terminals are positive and black are for negative terminals. Next step is to make a connection between positive terminal of one of the amps with one end of the wire. The other end of the wire is attached to negative terminal of another amp. Make the connections tight by screwing the knobs. This process is called bridging of amps.
The last step is to make the connections complete. Now we have to connect the amplifiers to the speakers. Only one terminal either positive or negative is used for connection with the wire. The other terminals of amplifiers which are free should be connected with the terminals on the speaker. Always ensure that we connect positive terminals of speakers and amplifiers together and negative terminals of speakers and amplifiers together. The speaker system now has improved sound after bridging of amplifiers . Browse through web sites like ehow com for further free tips.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
Learn more about Autozubehoer. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.